Department: Engineering

Reports To: Engineering Manager, Power Distribution Products

FLSA Status: Exempt

Employment Status: Full-Time, Permanent

Location: Lake Park, Florida (On-Site)

The Custom Order Engineer / Switchboard Design Specialist is responsible for translating customer specifications, project drawings, and quotations into complete, optimized, manufacturable designs for custom low-voltage switchboards, panelboards, and related electrical distribution equipment. This position reviews incoming orders for technical accuracy and code/standard compliance, produces engineering drawings (submittal, construction, as-built) and bills of material, and serves as the technical bridge between Sales, Quotation, Purchasing, and Production.

Additionally, this role will create & validate 3D-CAD designs for custom SWBD configurations at both the component and assembly level. This includes (but is not limited to) MTO steel, bus, and bracing/support elements. Ultimately, this role ensures that every assigned custom order is engineered accurately and on time, while minimizing cost and ensuring strict adherence to applicable UL, NEC, and customer requirements.

• Reasonable accommodations may be provided to enable qualified individuals with disabilities to perform the essential functions of the position.

• Review customer purchase orders, specifications, electrical plans, one-line diagrams, and quotations to confirm technical requirements, scope, and feasibility of custom switchboard and panelboard orders.

• Design custom low-voltage switchboards, panelboards, and other distribution equipment, including section layout, bus sizing, breaker and device selection, metering, and accessory configuration, in accordance with UL 891, UL 67, NEC, and applicable NEMA standards and customer requirements.

• Create and maintain engineering drawings, including elevations, one-line diagrams, wiring and schematic diagrams, nameplate schedules, and layout drawings using enterprise 2D & 3D CAD software.

• Generate accurate bills of material (BOMs) and enter or validate engineering data in the Company's ERP, CRM, and configuration systems to support purchasing and production.

• Prepare and issue customer submittal (approval drawing) packages; Incorporate customer, engineer-of-record, and contractor comments and manage drawing revisions through final release; Address order-specific technical questions/concerns.

• Identify discrepancies, code conflicts, or missing information in customer orders and communicate clarifications or recommended alternatives to Sales, Quotations, Project Management, and customers in a timely manner.

• Coordinate with Purchasing on component availability, lead times, and approved substitutions, and with Production on build sequence, schedule, and manufacturability.

• Provide technical support to the production floor, quality control, and testing personnel, resolving mfg. issues, field change requests, and non-conformances related to design.

• Support the quotation team with technical review of complex or non-standard requests to ensure quotations are accurate and manufacturable.

• Maintain engineering records, drawing archives, revision history, and documentation in accordance with ISO 9001 requirements and company engineering design standards.

• Contribute to the development of standard designs, templates, design rules, and process/product improvements that reduce engineering lead time and product cost, while contributing to attainment of site EHS & Quality objectives.

• Ensure compliance with safety procedures, company policies, quality standards, and applicable regulatory requirements.

• Perform other related duties as assigned.

Non-Essential Functions

• Participate in special projects, including new product development and design standardization initiatives; Support product certification programs as required.

• Assist with training/mentoring junior engineers and/or non-technical staff, as assigned.

• Occasionally participate in customer meetings, factory witness tests, or project coordination calls.

• Attend occasional meetings, training sessions, or company events.

Required Qualifications

• Bachelor's degree in Electrical Engineering, Electrical Engineering Technology, or a related field strongly preferred; An equivalent combination of education and directly related experience may be considered.

• Three to five years of experience in the design/engineering of low-voltage switchboards, switchgear, panelboards, motor control centers, or similar electrical distribution equipment required.

• Strong working knowledge of UL 891, UL 67, the National Electrical Code (NEC), and related industry standards required; Experience with UL 1558 would be an asset.

• Demonstrated ability to read and interpret electrical plans, one-line diagrams, specifications, and technical documentation.

• Proficiency with SolidWorks or comparable 3D-CAD software required; EPLAN 2D & 3D design experience would be an asset.

• Experience generating bills of material and working within ERP, CRM (e.g., Salesforce), and/or product configuration systems.

• Industrial PLC programming experience would be considered an asset.

• Participate in special projects, including new product development and design standardization initiatives; Support product certification programs as required.

• Assist with training/mentoring junior engineers and/or non-technical staff, as assigned.

• Occasionally participate in customer meetings, factory witness tests, or project coordination calls.

• Attend occasional meetings, training sessions, or company events.

Required Qualifications

• Bachelor's degree in Electrical Engineering, Electrical Engineering Technology, or a related field strongly preferred; An equivalent combination of education and directly related experience may be considered.

• Three to five years of experience in the design/engineering of low-voltage switchboards, switchgear, panelboards, motor control centers, or similar electrical distribution equipment required.

• Strong working knowledge of UL 891, UL 67, the National Electrical Code (NEC), and related industry standards required; Experience with UL 1558 would be an asset.

• Demonstrated ability to read and interpret electrical plans, one-line diagrams, specifications, and technical documentation.

• Proficiency with SolidWorks or comparable 3D-CAD software required; EPLAN 2D & 3D design experience would be an asset.

• Experience generating bills of material and working within ERP, CRM (e.g., Salesforce), and/or product configuration systems.

• Industrial PLC programming experience would be considered an asset.

Knowledge, Skills, and Abilities

• Knowledge of electrical distribution equipment, overcurrent protective devices, bus systems, metering, and short-circuit & ampacity ratings.

• Familiarity with major breaker and component manufacturers' product lines and selection criteria.

• Strong attention to detail and commitment to accuracy in drawings, BOMs, and documentation.

• Analytical, problem-solving, and troubleshooting skills.

• Ability to manage multiple custom orders simultaneously, prioritize work, and meet production deadlines.

• Effective written and verbal communication skills, including the ability to explain technical issues to non-technical audiences and customers.

• Ability to work collaboratively across Sales, Quotation, Purchasing, Production, and Quality teams.

• Proficiency with Microsoft Office applications, including Excel, Word, and Outlook.

• Commitment to workplace safety, quality standards, and continuous improvement.

Equipment Used

May regularly use:

• Computer systems and software applications, including CAD, ERP, CRM, and Microsoft Office

• Large-format printers and plotters

• Telephone, video conferencing, and standard office equipment

• Precision measurement instruments (when verifying builds on the production floor)

Work Environment

• Primarily an office environment with regular time spent on the manufacturing floor.

• While on the production floor, exposure to moving mechanical parts, noise, production equipment, and electrical equipment.

• Use of personal protective equipment is required when on the manufacturing floor.

• Work environment may include varying temperatures depending on facility operations.

• Occasional extended hours may be required to meet project or production deadlines.

Physical Requirements

The physical requirements described below represent those that may be necessary to successfully perform the essential functions of this position.

• Frequently sit for extended periods while working at a computer.

• Frequently use hands and fingers to operate a keyboard, mouse, and other office equipment.

• Occasionally stand, walk, reach, bend, stoop, and climb while reviewing equipment on the production floor.

• Occasionally lift, carry, push, or pull up to 25 pounds.

• Visual ability sufficient to review detailed drawings, read technical documents, and work on a computer screen for extended periods.

• Ability to communicate effectively in person, by phone, and through electronic communications.

ADA Compliance Statement

The Company is committed to providing equal employment opportunities to qualified individuals with disabilities. Reasonable accommodations will be provided to qualified individuals with disabilities to enable them to perform the essential functions of the position unless doing so would create an undue hardship on the Company.

Equal Employment Opportunity Statement

The Company provides equal employment opportunities to all employees and applicants and prohibits discrimination and harassment of any type, consistent with applicable federal, state, and local laws.

Meta Power Solutions is a leading manufacturer of oil-filled power and distribution transformers, low-voltage switchboards, medium-voltage switchgear, and containerized substations in North America. We design and build all of our own products in-house. The industries we serve include utilities, data centers, oil and gas, commercial construction, solar, and bitcoin mining.

Benefits:

• 401(k)
• Dental insurance
• Health insurance
• Paid time off
• Vision insurance